MB-6 Stone Color Enhancer

The MB-6 is a very effective colour enhancer. Its properties formula penetrates the pores of the stone and makes it look “wet”.

The result is permanate. It works well on tumble marbles, unpolished limestone, sandstones, slate and bush hammered finishes.

On honed limestone and granites 1-2 cotes are advisable, depending on the porosity. On porous surfaces such as sandstone 2-3 cotes are advisable. When applied to very porous stone, sandstones and limestone, we recommend completing the sealing with MB-4 after a curing time of 24 hours. Also it is extremely effective on black honed granite and brick-pavers At the same time it is a good water-repellent.

Direction for use: Make sure that the surface of the stone is detailed and clean. Free of any debris or residue of setting materials. Apply if liberally with a roller brush or a clean white rag. Protect areas or surrounding where the product is most likely to splatter. Always were rubber gloves. Let the product sit on the surface of the stone approximately for 15 min for maximum penetration. Remove the excess thoroughly, using a bit of mineral spirit is necessary.

500mls  -  $70.00 (Inc GST)